Blog

Overview of Metal Pressure Transducer Diaphragms

June 08, 2020 04:37 am

A diaphragm pressure transducer is a mechanical device that converts pressure changes into an electric signal, which can be measured to gauge changes in pressure. Diaphragm pressure transducers are particularly useful for low pressure applications. How Does a Pressure Transducer Work? Pressure[…]

Battery Enclosures for Military Applications

January 11, 2019 10:12 am

Batteries form critical components of many active weapon systems in military and defense projects. Because batteries contain toxic substances and must be kept in working condition, defense contractors are turning to battery enclosures as a crucial means to preserve the health of their systems.[…]

Deep Drawing Stainless Steel Parts

February 24, 2017 04:41 am

Stainless steel is corrosion resistant, strong, heat resistant and chemical resistant. It’s no wonder so many companies choose it for critical components. And while industries from aerospace and defense to health care and power generation utilize stainless steel, forming and deep drawing it into[…]

Metal Stamping for the Aerospace Industry

January 25, 2017 07:40 am

When it comes to the aerospace industry, there is no room for manufacturing error. The tight tolerances and precision measurements required doesn’t allow for “good enough,” it must be perfection.

Types of Tooling for Metal Diaphragms

November 30, 2016 12:53 am

Diaphragms are semi-elastic individual wafers with unique properties made from metal or elastomers that produce a predictable spring rate. In this article, we are referring to round, concentric ringed, thin metal diaphragms and the types of tooling used to create them.

Metal Diaphragms and Capabilities

October 24, 2016 08:30 am

The Capabilities and Applications of Metal Diaphragms Metal diaphragms are thin circular plates that undergo elastic deformation when subjected to pressure or axial loading. They are typically manufactured by forming a thin metal sheet into a ripple shape. At Hudson Technologies, we offer metal[…]

5-Axis Fiber Laser for Deep Drawn Manufacturing

October 24, 2016 02:43 am

At Hudson Technologies, we’re always looking for ways that we can provide improved parts and services. And although we have always designed unique solutions for the secondary processing of our precision 3D metal parts for aerospace, medical, automotive, electronic, and a variety of other industrial[…]

Why Choosing a Deep Drawn Manufacturer is About More than Just Part Cost?

October 24, 2016 02:36 am

When you’re searching for a manufacturer for your deep drawn products, cost is a very important part of the equation. However, getting a deep drawn supplier is about more than just looking at the bottom line in terms of parts cost. Don’t underestimate the value and importance in having quality[…]

4 Myths About Deep Drawn Manufacturing

May 17, 2016 01:55 am

Deep drawn metal stamping is a manufacturing process that competes with several other processes that create the same or similar products. However, the deep draw process has several significant differences that set it apart from those other methods. Without being an expert on manufacturing, you[…]

Seamless Solutions: Deep Draw Manufacturing

November 18, 2015 03:51 am

Hudson Technologies is an industry-leading manufacturer of high-quality standard and custom deep drawn metal enclosures and stampings. Because of our 79 years of stamping experience, vast knowledge of stamping technologies, and broad manufacturing capabilities—including a variety of shapes, sizes,[…]